Visitor Web Page Counter  Cozy Aircraft Project #1037

01/10/17

 
Home
Chap 1-3
Chap-4.htm
Chap-5.htm
Chap-6.htm
Chap-7.htm
Chap-8.htm
Chap-9.htm
Chap-10.htm
Chap-11.htm
Chap-12.htm
Chap-13.htm
Chap-14.htm
Chap-15.htm
Chap-16.htm
Chap-17.htm
Chap-18.htm
Chap-19.htm
Chap-20.htm
Chap-21.htm
Chap-22.htm
Chap-23.htm
Chap-24.htm
Chap-25.htm
Interests
Favorites
Photo Gallery

 

 

Welcome to my Web site!                           EAA member :1171731

Building of my Cozy Mark IV #1037. Over the next several / many years I will build before your eyes a

masterpiece, and if that is not possible just a good fun safe aircraft. :-)

And some other stuff I hope you find fun or useful....

Status: Plans Purchased: 04-2002 Built workshop that year. Started Project 01-2003 Scheduled completion 2015 - 18

Started working on the electrical chap23 engine

I've added a link "Interests page" to a video about a Cozy I liked, hope you enjoy it too.

2016  fuselage in primer (done) and firewall / engine work underway.

Update to Chap 23 working the engine systems, lots to do!!!s

Order my MT prop. I know that's a lot for 2015. got my MT prop see chapter 23 for pictures.

Currently working Chap-21, 22, 23, 24,25. Complete primer once all modes are done will go on to finish paint.

Chap-21, 22, 23, 24,25. build goes forward I will revisit these chapters as required.

See Chap. 23 Purchased my engine from Aero sport power

Total hours worked so far. 1955 hours up to chap-22,23, 24,25 Counting build time only.

Problem with your hands / skin when it comes in contact with the epoxy. Will it started with me, at first I had no problems. I was wearing the latex gloves and everything (I thought) was fine. Until one night my hands began to itch and then came the blister. You guest it I've developed a histamine reaction to the epoxy, what to do   First I checked the can of epoxy and found that white vinegar stop the chemical reaction, second I switched to Nitrile gloves. To protect my arms I put ply-9 gel on, you can get this from Wicks. So the process is like this: Gel, Gloves when finished wash off the Gel and then put on white vinegar I wet a paper towel, that solved it for me. I hope this helps other builders.

Engine from AeroSportPower chap. 23

Got the engine mount from CG Products  Chap. 23

Aero Sport will be the engine for me, I like the IO-375B1B 205HP Constant Speed, I will use a MT 3 blade propeller. Yes, I know it's big bucks but 90% of the aircraft is about the power train. We will see when I get there....

Questions or Comments about my Cozy project - E-mail: David & Lynne Barnes

Projected finish Date: 2018 I HOPE!!

Favorite Links

Weather

Aircraft related sites

 

Here's a link to the weather where I live.

Photo Album

Communities & Forums

Look at my Photo Album... no it's not full of my vacation pictures.  This web site is all about building some fun for my retirement in about 8 years. Hope to have the plane done by then. Whish me luck!  

Home | Chap 1-3 | Chap-4.htm | Chap-5.htm | Chap-6.htm | Chap-7.htm | Chap-8.htm | Chap-9.htm | Chap-10.htm | Chap-11.htm | Chap-12.htm | Chap-13.htm | Chap-14.htm | Chap-15.htm | Chap-16.htm | Chap-17.htm | Chap-18.htm | Chap-19.htm | Chap-20.htm | Chap-21.htm | Chap-22.htm | Chap-23.htm | Chap-24.htm | Chap-25.htm | Interests | Favorites | Photo Gallery

This site was last updated 01/10/17