Chap-15.htm
Home
Chap 1-3
Chap-4.htm
Chap-5.htm
Chap-6.htm
Chap-7.htm
Chap-8.htm
Chap-9.htm
Chap-10.htm
Chap-11.htm
Chap-12.htm
Chap-13.htm
Chap-14.htm
Chap-15.htm
Chap-16.htm
Chap-17.htm
Chap-18.htm
Chap-19.htm
Chap-20.htm
Chap-21.htm
Chap-22.htm
Chap-23.htm
Chap-24.htm
Chap-25.htm
Interests
Favorites
Photo Gallery

Cozy Construction Chapters.

 

Chapter 15 Firewall

Started 02/05/2011 finished xx/xx/xxxx Hours worked this chapter :03

These picture are the build of the firewall and canopy covered in Chap-18.

This picture shows the bid tap the goes on the firewall into the inside and on top of the main spar. then a second lay up goes on the outside of the firewall and the main spare flox is added to fill in the spar firewall jog.

Here it is after cure and the peel ply is removed, notice I left space for the two plywood pulley mounts that are used for the rudder cables later on.

Mounting the top half of the firewall

Here you can see the clark foam used to build up to the same level plane as the firewall plywood top and bottom. Once cured I was able to sand the foam level at all points.

Inside looking at the firewall floxed in place

The Chap-15 firewall build is coming soon. The above pictures are part of the Canopy build that included the plywood firewall segments and main spar.

 

Home | Chap 1-3 | Chap-4.htm | Chap-5.htm | Chap-6.htm | Chap-7.htm | Chap-8.htm | Chap-9.htm | Chap-10.htm | Chap-11.htm | Chap-12.htm | Chap-13.htm | Chap-14.htm | Chap-15.htm | Chap-16.htm | Chap-17.htm | Chap-18.htm | Chap-19.htm | Chap-20.htm | Chap-21.htm | Chap-22.htm | Chap-23.htm | Chap-24.htm | Chap-25.htm | Interests | Favorites | Photo Gallery

This site was last updated 09/25/11