|Cozy SVX Engine Installation|
|The red hose is cabin heat exhaust, which helps with ground cooling.
The two connectors are for the ECU
|The radiator is mounted below the engine. It is a custom aluminum unit from BeCool in Toronto
The starter is shown here too.
|This is the inside of the firewall. The box is the cabin heater with a diverter valve so hot air can flow into the cabin or out thru the cowl for ground cooling. The ECU is mounted on the right side of the firewall. The panel in the lower part of the picture is just a cover and heat rest that goes in front of the heater box and ECU|