Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - djrise

Pages: [1]
1
Hangar Flying / Re: Longez Gear Leg Fairings for Sale
« on: December 25, 2011, 11:45:22 AM »
I am interested in the fairings.
May I ask why you don't want them?

2
Hangar Flying / Re: Help me identify this fuel cap
« on: June 18, 2008, 03:45:50 PM »
One more note. If your caps with the gasket you show in your picture are ever exposed to auto gas they will swell and you will have a heck of a time getting them back in the filler hole. the new caps use a expandable viton O ring. NO PROBLEM

3
Hangar Flying / Re: Help me identify this fuel cap
« on: June 18, 2008, 03:32:05 PM »
try part number 05-01391 ACS new style fuel fuel cap In january of 2007 cost was $34.30 each.

4
Hangar Flying / Jim Price's record
« on: March 30, 2008, 02:41:47 PM »
I think his engine was a 0-290D2. Rated at 135hp at 2650 rpm.

5
Hangar Flying / spring
« on: December 07, 2007, 03:43:53 PM »
If memory serves me. It is a 1900 pound die compression spring. Color code yellow.

6
Hangar Flying / thermal shock
« on: November 20, 2007, 12:23:16 PM »
Jack, Could you direct me to Lycoming, or Continental documentation about this?
All I can find says. Fuel starvation is how to turn off the engine.

7
Hangar Flying / Hi heat shut down
« on: November 19, 2007, 06:00:53 PM »
I think he means a turbo-ed engine.

8
Hangar Flying / fueltanks
« on: October 18, 2007, 05:03:28 PM »
There are many company's that make custom blow molded fuel tanks, some even with baffles. If the dimensions were just under the plans size tanks. I would think that would be the way to go. I'm surprised Vans has not looked into this for their kit builders. Build all except top. Install plastic tank, plumb, and screw on top skin instead of rivet.
Could be made for Long-EZ, Cozy fuel strakes too. Only problem not a very large production run for them.
These tanks are widely used on everything from Weed Whackers, Motor cycles, to Bulldozers. inexpensive, and complex shapes don't seem to be a problem.

9
Hangar Flying / Prop
« on: September 30, 2007, 08:42:37 PM »

10
Hangar Flying / GU Canard
« on: August 20, 2007, 12:25:46 PM »
I flew my Long for over 10 years before I put on the VG's. I was reluctant to put them on as I had no change in pitch in rain, bugs, or clouds. I think the pitching issue was addressed in a CP. The authors conclusion was those with problems had their canard incident wrong. I installed them just to see if the claims about slower landing speed were true. They are.

11
Hangar Flying / GU Canard
« on: August 20, 2007, 07:14:02 AM »
I have them on my GU canard. They do lower the landing speed by about 10 knots. I also carry extras and a small tube of clear RTV. VG"s seem to attract idiots who try to see how well they are attached.

12
Hangar Flying / cover
« on: June 20, 2007, 06:59:49 PM »
Bruce's Custom covers
They are not cheep, but they are real well made and cover the whole plane.
I have had mine for the last 5 years, and no problems.

13
Hangar Flying / light covers
« on: October 17, 2006, 01:09:55 PM »
Aircraft Spruce P/N 11-04055 :wink:

14
Hangar Flying / Long EZ on e-bay
« on: May 02, 2006, 06:30:54 AM »
I live in the Indianapolis area. I also have my Long-EZ, I built. Based here. I do not know of this Long-EZ. The price sounds low, But it is not flying. As for the weight. It could be just a bad set of scales. Still not too high if you add starter, alternator, lights, stuff. If you can find out where he is located. I would take a look at it.
DJ Rise
on memberlist.

Pages: [1]