Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - flyingwaldo

Pages: [1] 2 3 ... 19
1
Hangar Flying / Re: Gas Shock
« on: April 20, 2018, 06:36:04 PM »
Thanks Joe.  Need to have a friend measure it for me and get the part number....

2
Hangar Flying / Gas Shock
« on: March 20, 2018, 10:13:11 AM »
Have been out of touch with flying for a year now and can't find my notes and links for a canopy gas strut.  Anyone know where to get one, length and strength?  Am thousands of miles from the plane so can't see it to figure it out myself.
Thanks!

3
Hangar Flying / Wood Prop For Sale
« on: July 08, 2017, 12:32:37 PM »
62" x 75 wood prop used for 150 p O-320.  Refinished and not used since.

4
Hangar Flying / Re: storing a Varieze on the ramp in Phoenix?
« on: July 08, 2017, 12:30:14 PM »
If you can't walk on the tarmac barefoot I'd be seriously worried about the condition of your composite after a few 115 days.  More knowledgeable people should chime in shortly.
Friend has a Long EZ that has sat outside in Chicago for 20 years.  Flies regularly during the season.  Always covered and shovels the snow off when needed.

5
For Sale/Wanted / Re: Looking for a Long-ez canopy
« on: April 19, 2017, 10:30:00 PM »
Mine is sold. Picked up today.

6
For Sale/Wanted / Re: Looking for a Long-ez canopy
« on: January 19, 2017, 09:59:46 AM »
email me: gbisogno at yahoo dot com

7
Hangar Flying / Re: magneto problem
« on: November 05, 2016, 07:37:35 PM »
http://www.aircraftmagnetoservice.net/


Call the fellow at Aircraft Magneto Service in Washington.  Really great guy will be very helpful and educate you, as he did me.  They may have moved.







8
Hangar Flying / Re: magneto problem
« on: November 02, 2016, 02:15:04 PM »
Being very electrically challenged I had the same problem trying to check my mag wiring.  Turns out, and hopefully a smarter person will explain it to you, it will always show continuity and you can't test it that way.  Good luck.

9
For Sale/Wanted / Re: NG-30 drawing needed
« on: October 08, 2016, 06:38:02 PM »
Eric,
Try the yahoo canard group.  Most knowledgable folk are there plus a couple questionables....
Otherwise try Beagle at canardfinder.com
He has a trove of plans and parts listings.
Good luck.

10
Hangar Flying / Re: Long ez gear wanted
« on: October 01, 2016, 09:47:14 AM »
Call them.

11
Hangar Flying / Re: Denver Area EZ's
« on: October 01, 2016, 09:46:31 AM »
http://www.freeflightcomposites.com/burrall-sanders/

If you don't find someone closer this is your local guru:

12
For Sale/Wanted / Re: SQ2000
« on: August 13, 2016, 07:41:16 PM »
Common advice if you're looking for parts -ASK BEAGLE

13
Hangar Flying / Re: Old Long EZ New Owner in TN
« on: June 24, 2016, 07:31:17 PM »
Go see Robert Harris in Covington.  One of the top canard people in the world in your back yard!


14
Hangar Flying / Re: Old Long EZ New Owner in TN
« on: June 19, 2016, 06:33:21 PM »
Go see Robert Harris in Covington.  One of the top canard people in the world in your back yard!

15
Hangar Flying / Re: Builder Advice Please
« on: June 01, 2016, 10:04:10 PM »
From what I remember there are some builders down your way that might be more helpful with a look see at this plane.  Buying a homebuilt without personal qualifications or knowledgeable inspection is not the best approach.  Wayne is certainly knowledgeable of the Long EZ.  May not want the liability but you ought to find someone. Well worth the money.  If you blindly buy a junker it could get real expensive.  There are several of those actually flying.....

Pages: [1] 2 3 ... 19