Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Reb Wallace

Pages: 1 [2] 3 4
16
For Sale/Wanted / brake job
« on: February 17, 2008, 09:55:08 PM »
I have a varieze with rosenhan disc brakes I need to order some new pads does anyone know where you can find parts for these brakes :?

17
For Sale/Wanted / vsi
« on: February 04, 2008, 05:36:01 PM »
I sent a pm I am interested in buying the vsi tell me where to send the money and how you wan't it thanks rebel

18
Hangar Flying / com antenna
« on: December 07, 2007, 07:09:21 PM »
well I ordered the kit sounds like they know what they are  talkin about when it comes to antennas thanks the rebel :D

19
Hangar Flying / com antenna
« on: December 05, 2007, 05:03:05 PM »
I just recently got an Icom a-200 for my veze that didn't come with an antenna. am in need of info on an antenna I currently have a 3 ft. tube on the back of drivers seat that original builder installed it worked well with the portable A24 I have been using until I needed to talk to tower in class B at 30 mi range. tower could not read well enough to let me enter class B. any sugestions on type antenna to use would like to keep it inside if possible. :?:

20
Hangar Flying / night vfr
« on: November 24, 2007, 06:04:26 PM »
well i got the position lights on the eze but could not get the strobes had to send them back because the original owner did not install a big enough tube through the wing to install the wire for strobes so going to put anti collision on the belly thanks  again for all the useful info the rebel

21
Hangar Flying / night vfr
« on: November 06, 2007, 06:26:45 PM »
in my travels when the daylight is longer i have no problem with time factors but when the days are shorter i like to get a jump on sunup  and so just want to stay legal fo takeoff before sunup and coming back just after sundown and guess it wouldn't hurt to be seen better in daylight since everyone has a hard time seeing the eze around my home base. thanks for all the helpful info, will try airplane gear. :D   the rebel

22
Hangar Flying / night vfr
« on: November 05, 2007, 07:58:03 AM »
I wan't to set up veze for night flying. know what fars require but looking for a source for position lights and other lights already have inst lit.any info would be very helpful can post or email me. :D

23
Hangar Flying / ELT location
« on: August 22, 2007, 07:18:31 PM »
looks like it will go in the back in passenger compt. will put antenna on back of rollover structure. thanks everyone for the input. will see  you in Kanab if my propeller ever gets here. :lol:

24
Hangar Flying / ELT location
« on: August 04, 2007, 12:17:43 PM »
any varieze drivers out there know the best place to put elt in a varieze is back of front seat acceptable even though it is not laying flat. :?:

25
Hangar Flying / bill james
« on: June 26, 2007, 07:20:36 PM »
I log on to EZ Squadron every day just to see if
Bill has a new story hope he wii tell one soon the rebel :)

26
For Sale/Wanted / v.w. conversion
« on: June 07, 2007, 09:07:15 PM »
I have a R.D.Webster v. w. conversion with turbo. dynafocal engine mt. oil cooler. fuel venturi. 0 time on conversion. was built for quickie project never finished. Have 5 grand in engine will sell for half price plus you pay shipping. email for more info. rebel777@frontiernet.net

27
Hangar Flying / propeller
« on: May 26, 2007, 08:26:00 PM »
I am thinking about getting a prince p tip prop for my verieze 0-200 but need more info about this prop being used on a pusher does anyone have info on it and is  2 blade better than 3 blade

28
Hangar Flying / vw conversion engine
« on: April 15, 2007, 10:09:34 AM »
I have a JD Webster vw conversion 1600  125 HP engine with turbo with oil cooler. 0 time was built for quickie but project was never finished. wil sell for 1/2 price. Email for details rebel777@frontiernet.net

29
Hangar Flying / canopy scratches
« on: March 02, 2007, 06:30:51 PM »
does anyone know the best way to remove scratches from plexiglass canopy. :?:

30
Hangar Flying / canopy replacement
« on: February 27, 2007, 07:37:53 PM »
I just finished replacing my canopy on my verieze used a dremmel to cut old glass out of frame . Had problem getting the right canopy for eze but finally made the canopy I recieved work after about 40 hours of work it is ready for test flight. I laid up three bids of ply on the outside and three on the inside aprox 1 inch on the plexiglass. had to modify the frame to make the new canopy fit. :roll: its a long story . but it looks good. if you need exact details you can email me a rebel777@frontier net.net

Pages: 1 [2] 3 4