Author Topic: Cozy MKIV Canard rigging templates  (Read 4850 times)

0 Members and 1 Guest are viewing this topic.

Offline vonjet

  • Newbie
  • *
  • Posts: 38
    • View Profile
Cozy MKIV Canard rigging templates
« on: March 31, 2013, 06:42:28 PM »
Anybody have the Roncz canard incidence template for Cozy MKIV i can borrow to mount my Canard?
Please email me. Vonjet@gmail.com

Offline Joe Person

  • Newbie
  • *
  • Posts: 107
    • View Profile
Re: Cozy MKIV Canard rigging templates
« Reply #1 on: April 01, 2013, 10:57:05 AM »
For the Roncz incidence template for a MK IV, you can get that on Marc Zeitlin's website, under Cozy Newsletter #80.
Joe Person
VariEze N79JN
Cozy #879 Under Construction
EAA Tech Counselor 4418
Bothell, WA (KPAE)

Offline vonjet

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: Cozy MKIV Canard rigging templates
« Reply #2 on: April 01, 2013, 07:16:16 PM »
I know but I was hoping to find one built that I could borrow.  I have been trying multiple times to print ones off the internet and Cant seem to get the correct sizing of the print out.

Offline dorr

  • Newbie
  • *
  • Posts: 195
    • View Profile
    • http://www.canardfinder.com
Re: Cozy MKIV Canard rigging templates
« Reply #3 on: April 01, 2013, 11:58:12 PM »
By the way, the Berkut guys found that there can be a kind of "null" in pitch if you don't get the gap between elevator and canard exactly right - so Dave Ronneberg has a very good template for that gap too...

Beagle
David A.C.Orr
"Beagle"
www.canardfinder.com

Offline vonjet

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: Cozy MKIV Canard rigging templates
« Reply #4 on: April 03, 2013, 07:49:44 PM »
What is it? a tongue depresser with 80 grit sand paper on it?  :o 

Offline dorr

  • Newbie
  • *
  • Posts: 195
    • View Profile
    • http://www.canardfinder.com
Re: Cozy MKIV Canard rigging templates
« Reply #5 on: April 08, 2013, 06:38:21 PM »
No it's about a foot long, with the elevator bottom and the gap as a kind of tooth sticking up between canard and elevator.

Beagle
David A.C.Orr
"Beagle"
www.canardfinder.com

Offline vonjet

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: Cozy MKIV Canard rigging templates
« Reply #6 on: April 13, 2013, 09:23:40 AM »
Im not sure how that would help me at this stage since my elevator hinges are mounted already.
Wouldnt that be a tool for mounting the hinges??

And Am I to assume nobody on this forum has canard incidence template for loan? Did everyone guess the incidence or just eyeball it???

Offline Marc Zeitlin

  • Newbie
  • *
  • Posts: 34
    • View Profile
    • COZY Builders Web Site
Re: Cozy MKIV Canard rigging templates
« Reply #7 on: April 13, 2013, 11:00:32 AM »
And Am I to assume nobody on this forum has canard incidence template for loan? Did everyone guess the incidence or just eyeball it???
See:

http://cozybuilders.org/newsletters/

under #80 - you can download the template and fabricate it yourself.

You're welcome.

Offline vonjet

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: Cozy MKIV Canard rigging templates
« Reply #8 on: April 16, 2013, 02:10:25 PM »
Thanks Marc.  But how are we able to confirm 1:1 printing from that?  I have tried this before as well as another site member tried to help and we could not get a correct 1:1 print. 


Also Dave Orr,  How can I borrow this Elevator rigging tool you mention?  I need to re-install my elevator hinges I do not know anybody at Berkut.

Offline go ez

  • Newbie
  • *
  • Posts: 92
    • View Profile
Re: Cozy MKIV Canard rigging templates
« Reply #9 on: April 17, 2013, 04:04:31 PM »
I'm no expert but do the corner angles show a reference distance of 8" apart so you can scale up/down accordingly?
Regards
Steve