Author Topic: Long Ez molded nose  (Read 1956 times)

0 Members and 1 Guest are viewing this topic.

Offline ozarkav8r

  • Newbie
  • *
  • Posts: 2
    • View Profile
Long Ez molded nose
« on: December 26, 2016, 08:22:46 AM »
I have a molded nose that came with my Long Ez project. (Not sure who produced this)

Does anyone have any experience attaching this to the fuselage?

I would appreciate any tips or advice.  Somewhat tempted to carve my own and not bother with it.

See attached picture


Offline Fred N.

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Long Ez molded nose
« Reply #1 on: December 26, 2016, 12:12:53 PM »
Your small picture appears to have 2 nose cones with a possible section for attaching between one and the fuselage.  Enlarged, I was less sure if these parts were even part of a Long-eze.

Please give more information about what you think it is and how it is to be used.  I have done a lot of repairs, but no actual building of components.  If it were me, and there is no nose, I would use the plans to build a new one.  Somewhere along the way I might discover why these pieces were/are not installed.

Offline ozarkav8r

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Long Ez molded nose
« Reply #2 on: December 26, 2016, 02:12:54 PM »
Here is another picture.  It is actually a left and right half that apparently supposed to be joined together.

I have not seen this before either.  I'm a former cozy mkiv builder but new to the long ez world.


Offline dorr

  • Newbie
  • *
  • Posts: 195
    • View Profile
    • http://www.canardfinder.com
Re: Long Ez molded nose
« Reply #3 on: December 29, 2016, 02:58:06 AM »
Get in touch David at CanardFinder dot net

I've got people who can help with instructions.

Beagle
David A.C.Orr
"Beagle"
www.canardfinder.com